Do it yourself
Frequently asked questions about cars and motorcycles

How to modify or deactivate the auto-lock system on the Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

In this guide, we will see how to modify the auto-lock system settings, as well as the automatic door locking after reaching a certain speed, on the Volkswagen Golf; in order to carry out this type of operation, it is necessary to use a specific software such as VCDS. We then connect the computer to the car's OBD port and select the auto-lock setting; at this point, it will be possible to modify the auto-lock activation speed or deactivate it completely, as shown in the video. Once the operation is completed, we turn off the instrument panel and finally disconnect the computer.

Posted on 3 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this short guide, we will see the main instructions that will allow us to modify the automatic door locking settings, once a certain speed is reac…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To deactivate the safe lock on the Volkswagen Golf, you will need to use a diagnostic tool to access the settings of the control unit: the scanner mu…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today we will discover the instructions that will allow you to deactivate the alarm system of the Volkswagen Golf in simple and quick steps. To deact…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos