Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

Today, you will see the instructions that will allow you to activate or deactivate the automatic door locking system on a Volkswagen Golf. To perform this operation, you will need to use specific software connected to the OBD port of the vehicle; this will enable communication with the control unit, as shown in the video.

At this point, follow the guided procedure to activate or deactivate the automatic locking system, setting the activation speed and more; finally, turn off the ignition and disconnect the tool, following the video tutorial to the end!


Updated on 8 November 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) In this short guide, we will see the main instructions that will allow us to modify the automatic door locking settings, once a certain speed is reac…
Volkswagen Golf (2003-2008 / Golf 5, Golf V, MK 5) In this guide, we will see how to modify the auto-lock system settings, as well as the automatic door locking after reaching a certain speed, on the …
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) This guide will show you how to activate and deactivate the automatic door locking on the Volkswagen Golf Sportsvan in simple steps. First, get in th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos