Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear door panel of the Volkswagen Jetta MK5

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

In this video, we will see how to disassemble the rear door panel of the Volkswagen Jetta MK5: we will start by removing the plastic cover of the handle, under which we have two T30 bolts; we pry under the cover and remove it. Under the panel, we have a T20 bolt.

After removing these three bolts, we pry on the three sides with a screwdriver - gently - to remove the clips that hold the panel to the bodywork.

When it is lifted, we can push it upwards, always in a straight direction, in order to remove it from its housing without damaging it.


Posted on 4 February 2025 by ScegliAuto


Related tutorials

Disassembly of the front door panel of the Volkswagen Jetta.
Disassembly of the front door panel of the Volkswagen Jetta.
Volkswagen Jetta (2005-2010 / MK 5, A5) Below we will discover the steps that will allow us to disassemble and remove the front door panel of the Volkswagen Jetta. First, let's open the car…
Removing the Rear Door Panel of a VW Jetta
Removing the Rear Door Panel of a VW Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) Remove the rear door panel on a Volkswagen Jetta. Use a screwdriver to unscrew the screws located in the space of the upper door opening lever and th…
How to Remove the Rear Door Panel of the Volkswagen Jetta?
How to Remove the Rear Door Panel of the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To remove the rear door panel of the Volkswagen Jetta, use a tool to pry off the trim covering the armrest. Underneath, you will find screws that nee…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos