Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the front brake pads on a Volkswagen Polo 9N

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake pads

See other generations:
Video tutorial

In this video we can see how to replace the front brake pads of a Volkswagen Polo 9N: lift the hood and open the brake fluid reservoir cap, remove the front wheels and lift the front of the vehicle, then remove the dust caps from the brake calipers in order to unscrew them; separate the pads from the brakes with a pry bar; remove the brake caliper.

To prevent depressurization of the braking system, tie the caliper to the suspension with a wire, and do not press the brake pedal for any reason.

Check the support, guide pin, and dust cover of the brake caliper. Clean and replace them if necessary, then remove the brake pads; take the opportunity to measure the thickness of the brake disc.

Clean the brake caliper support from dirt and dust with a wire brush and brake cleaner, press the brake caliper piston with a retractor, then treat the new pads with an anti-squeal paste. Make sure the disc surface is clean, then install the new pads and tighten them with a torque wrench to 35Nm. Reinstall the dust caps, treat the part of the disc in contact with the wheel with copper grease and then reassemble the wheel.

We can move on to the other wheel.


Posted on 9 February 2025 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the front brake pads on a Volkswagen Polo, lift the car so that the front wheel is off the ground: you will need to remove the wheel by lo…
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Let's see how to replace the brake pads on a Volkswagen Polo. Lift the car with a jack and remove the wheel to access the disc and brake caliper. Uns…
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Before you start, open the boot of your Volkswagen Polo to retrieve the spare wheel and the jack provided in the basic kit. Begin by lifting the fron…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos