Do it yourself
Frequently asked questions about cars and motorcycles

How to repair the windshield washer control on a Volkswagen Caddy

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Checks and maintenance

In this video, we see how to repair the windshield wiper control that has stopped working on a Volkswagen Caddy: but the method is valid for all Volkswagen models. Of course, the first thing to do is to check that there is liquid in the windshield washer reservoir, possibly top it up and then try again. If we hear a buzzing sound and nothing happens, then it is likely that the nozzles are clogged; they can be cleaned or replaced. If we don't even hear the pump working, then the problem is probably a fuse, which on Volkswagen models is almost certainly located in the engine compartment; check the exact position in the diagram found in the owner's manual: windshield washer pump. These fuses can also be visually checked, so let's replace it and try again. If the problem is not solved, then we will have to look for the pump located under the wheel arch. The YouTuber shows us the location on various Volkswagen models. Both the pump and the integrity of the wiring and electrical connectors must be checked.

Posted on 10 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Caddy (2003-2020 / MK 3, 2K) Here are the instructions for dismantling and replacing the diesel filter of the Volkswagen Caddy. First, open the bonnet of the vehicle and locate t…
Volkswagen Caddy (2020-2026 / SB) In this tutorial, you will see how to reset the tyre pressure light on a Volkswagen Caddy van, a very simple and quick operation. Before doing this, …
Volkswagen Caddy (2003-2020 / MK 3, 2K) In this tutorial, see how to change the language of the onboard computer in the Volkswagen Caddy, a very simple and quick operation. First, insert th…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos