Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Oil and Filter on Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Oil filter

How to replace the oil and filter on a Volkswagen Polo? Follow this guide to proceed with the replacement: lift the car with a column lift and undo the bolt of the oil sump (using the appropriate spanner), allow the oil to drain into a container (tighten the bolt at the end of the draining). Using a socket spanner, undo the large locking bolt of the oil filter cap, remove it, and position a new one. Lower the car to the ground, then open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet. Finally, top up with the new oil.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement on a Volkswagen Polo 1.2 TSI
Engine Oil and Oil Filter Replacement on a Volkswagen Polo 1.2 TSI
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this video tutorial, you will see how to replace the engine oil and oil filter on a Volkswagen Polo 1.2 TSI. First, open the bonnet and remove the…
Oil change and oil filter replacement for the Volkswagen Polo 1.2 TSI.
Oil change and oil filter replacement for the Volkswagen Polo 1.2 TSI.
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Let's see how to perform the routine maintenance of replacing the engine oil and oil filter on the Volkswagen Polo 1.2 TSI. First, lift the vehicle a…
Oil and Oil Filter Change for the Volkswagen Polo
Oil and Oil Filter Change for the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Let’s discover the step-by-step instructions for changing the engine oil and oil filter while performing the regular maintenance service on the Volks…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos