Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door panel of the Volkswagen Polo 6R

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Car door

In the following guide addressed to all of you who own a Volkswagen Polo 6R, we will explain the necessary steps to easily remove the rear door panel. First of all, get yourself a Torx TX30 key, then open the door in question and remove the plastic cover located on the inner handle. Once you have done this, use the TX30 key to unscrew the two screws present. Then unscrew the screws located in the lower area of the door and proceed with the removal of the panel. Finally, disconnect the electrical connector.

Posted on 21 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door of the Volkswagen Polo
How to Remove the Rear Door of the Volkswagen Polo
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) Below are the steps to remove and replace the rear door of the Volkswagen Polo, which also applies to the Seat Ibiza. First, open the rear door and u…
How to Open the Boot Lid of the Volkswagen Polo
How to Open the Boot Lid of the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) This guide shows you how to open the rear boot lid of the Volkswagen Polo, following the instructions below. First, take your remote control and star…
How to Open the Boot Lid of a Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Good morning, today’s goal is to correctly open the rear boot lid of your Volkswagen Polo. Start by exiting the car. Next, press the lock release but…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos