Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a VW Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

See other generations:
Video tutorial

How to replace the timing belt on a Volkswagen Passat 2000 TDI. Here’s how to proceed: open the engine bonnet and lift it, securing it; remove the coolant reservoir with a socket wrench, disconnect the wiring harness with pliers, and remove the plastic undertray with a screwdriver.

Lift the car on a column lift to access the underside.

Use a spanner to loosen the tensioner pulley and slide the belt off its seat. With a socket wrench, unscrew the tensioner pulley bolt, and remove the water pump as shown in the video.

Install the new water pump, the tensioner, and the belt, and tighten everything with the socket wrench.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Volkswagen Passat 2.0 TFSI
Guide to replacing the timing belt of the Volkswagen Passat 2.0 TFSI
Volkswagen Passat (2005-2010 / B6, 3C) In this guide, we will see the useful information for disassembling and replacing the timing belt of the Volkswagen Passat 2.0 TFSI; the manufacturer…
Guide to Replacing the Timing Belt of the Volkswagen Passat 2.0 TDI
Guide to Replacing the Timing Belt of the Volkswagen Passat 2.0 TDI
Volkswagen Passat (2005-2010 / B6, 3C) Today, we will discover the steps and instructions on how to remove and replace the timing belt of the Volkswagen Passat 2.0 TDI. First, open the bon…
Replacement of the timing belt of the Volkswagen Passat 2.0 TDI
Replacement of the timing belt of the Volkswagen Passat 2.0 TDI
Volkswagen Passat (2010-2014 / B7) Let's see the directions that will show us the procedure for disassembling and replacing the timing belt of the Volkswagen Passat 2.0 TDI. First, we …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos