Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Volkswagen Passat

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Headlight bulb

Today we will see the instructions for disassembling and replacing the headlight bulb of the Volkswagen Passat. First, we open the hood of the car and start removing the plastic cover protecting the bulbs; then we disconnect the electrical connector of the light, removing it together with the bulb holder, as shown in the video. At this point, we install the new low beam bulb, of the correct type and with the same attachment; we check the operation of the bulbs and finally reassemble the plastic cover, closing the hood!

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Volkswagen Passat?
How to Replace the Front Headlamp Bulb on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To replace the front headlamp bulb on a Volkswagen Passat, open the bonnet to access the engine bay. Once the bonnet is open, remove the circular cov…
How to Replace the Front Headlight Bulb on a Volkswagen Passat
How to Replace the Front Headlight Bulb on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Before starting, open the front bonnet of your Volkswagen Passat. Begin by unscrewing and removing the rear cover of the front headlight bulb. Next, …
How to Replace the Headlamp Bulb of the 2013 Volkswagen Passat
How to Replace the Headlamp Bulb of the 2013 Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) If you need to replace the headlamp bulb of your 2013 Volkswagen Passat B7, follow these steps carefully to complete the replacement safely. First, e…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos