Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery replacement for the Volkswagen Touareg

Model: Volkswagen Touareg MK 2, 7P - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

The following steps will show us how to disassemble and replace the battery of the Volkswagen Touareg vehicle. First, we open the front passenger door and start disassembling and removing the seat, unscrewing all the fixing screws and disconnecting the electrical connectors below; then we remove the floor covering to access the battery compartment, as shown in the video.

At this point, we disconnect both battery terminals to remove it, replacing it with the new one (of the correct type and with the same amperage); finally, we reassemble the front seat!


Posted on 25 July 2025 by ScegliAuto


Related tutorials

How to Replace the Battery in a Volkswagen Touareg?
How to Replace the Battery in a Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) To replace the battery in a Volkswagen Touareg, loosen the screws securing the front and rear lower seat, disconnect the connectors, and remove the s…
How to replace the battery of the Volkswagen Touareg key
How to replace the battery of the Volkswagen Touareg key
Volkswagen Touareg (2010-2018 / MK 2, 7P) Today we will explain how to replace the battery of the Volkswagen Touareg key in a simple and fast way. To perform the replacement, we need a small …
How to Replace the Key Battery on a Volkswagen Touareg
How to Replace the Key Battery on a Volkswagen Touareg
Volkswagen Touareg (2017-2024 / ) Start by inserting the tip of a thin but sturdy tool into the slot between the cover and the body of the key fob for your Volkswagen Touareg, then le…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos