Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the steering angle sensor on Volkswagen cars?

Model: Volkswagen Volkswagen Various
Part: Checks and maintenance

Video tutorial

In order to reset the steering angle sensor mounted on Volkswagen vehicles, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the instrument panel is turned on, you can turn the steering wheel all the way to the left and then all the way to the right.

This operation should be repeated three times, and then you can turn the key in the opposite direction to turn off the instrument panel. Once it is turned on again, you can verify that everything is functioning correctly.


Posted on 19 August 2025 by ScegliAuto


Related tutorials

How to Replace the Steering Angle Sensor on Volkswagen Vehicles?
How to Replace the Steering Angle Sensor on Volkswagen Vehicles?
Volkswagen Volkswagen Various To replace the steering angle sensor on Volkswagen vehicles, loosen the screws that secure the airbag at the centre of the steering wheel, located at…
How to reset the Climatronic on Volkswagen vehicles?
How to reset the Climatronic on Volkswagen vehicles?
Volkswagen Volkswagen Various To reset the Climatronic on Volkswagen vehicles, press and hold the air recirculation button and the ECON button simultaneously while the dashboard i…
How do you reset the AdBlue warning light on Volkswagen cars?
How do you reset the AdBlue warning light on Volkswagen cars?
Volkswagen Volkswagen Various To reset the AdBlue light on Volkswagen vehicles, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located on the d…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos