Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the airbag light on a Volkswagen without specific equipment

Model: Volkswagen Volkswagen Various
Part: Warning light – error code

Video tutorial

In this video we can see how to reset the airbag light on a Volkswagen car: in reality the tool would be necessary because it is supposed that before the reset, the airbag must be repaired in a workshop; however Volkswagen allows the reset even without the tool, by removing the car's battery terminals, although this is only a temporary solution.

The definitive solution can be found in the wiring located under the passenger seat, where there may be corroded contacts, which can be sprayed with WD-40, or loose or damaged wires; by restoring them, the airbag light will turn off without the need for specific equipment.

Otherwise, we can follow these steps: locate the airbag control unit, which is probably located under the passenger seat or in the center console; unplug the connector and leave it disconnected for about 15 minutes, then reconnect it and see if the light has turned off. If it remains on, then we should have the car checked by a professional.


Posted on 20 August 2025 by ScegliAuto


Related tutorials

How to reset the airbag warning light on the Volkswagen California?
How to reset the airbag warning light on the Volkswagen California?
Volkswagen Volkswagen Various To reset the airbag warning light on the Volkswagen California, connect a scanner to the vehicle's OBD port, located on the dashboard just below the …
How to reset the airbag warning light on Volkswagen vehicles?
How to reset the airbag warning light on Volkswagen vehicles?
Volkswagen Volkswagen Various When the airbag warning light appears on a Volkswagen, it means there is a generic malfunction in their operation: to identify the problem, connect t…
How to deactivate the airbag on Volkswagen group cars
How to deactivate the airbag on Volkswagen group cars
Volkswagen Volkswagen Various On models from the Volkswagen group, including Audi and Seat, the procedure to deactivate the passenger airbag is the same. The passenger airbag shou…

Other guides you may be interested in

    Frequently Asked Questions

    • Volkswagen Vari - How to retrieve the activation code, voice commands, Volkswagen cars? Read answer
    • Volkswagen Vari - What does "security code 2" mean in Volkswagen? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos