Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Volkswagen Crafter?

Model: Volkswagen Crafter 2F, MK 1, 2E - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

It will be possible to completely delete the Service indicator shown on the instrument panel of the Volkswagen Crafter by turning on the instrument panel, inserting the appropriate key into the ignition switch: once the instrument panel is activated, you will need to hold down the button located to the left of the instrument panel until the wrench icon and the remaining kilometers until the next maintenance appear.

When this screen is displayed, you will need to hold down the button again for a few seconds until a confirmation message appears.

At this point, you can turn off the instrument panel to finish.


Posted on 9 September 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Volkswagen Crafter
How to Reset the Service Light on the Volkswagen Crafter
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) This article shows how to reset the service light on the Volkswagen Crafter. First, ensure the gearbox is in neutral if it’s manual or in P if it’s a…
How to Reset the "Service" Light on a Volkswagen Crafter?
How to Reset the "Service" Light on a Volkswagen Crafter?
Volkswagen Crafter (2006-2017 / 2F, MK 1, 2E) Hello, today discover how to reset the "Service" light on your Volkswagen Crafter. Start by sitting in the driver's seat of the van. Then, press and …
How to Reset the Service Light on a Volkswagen Crafter
How to Reset the Service Light on a Volkswagen Crafter
Volkswagen Crafter (2006-2017 / 2F, MK 1, 2E) Today, I will explain how to reset the service light related to the service interval on a Volkswagen Crafter model 1, independently. To reset the ser…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos