Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the alternator of the Volkswagen Tiguan 2.0 TDI.

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Alternator

See other generations:
Video tutorial

The instructions provided in this guide will allow us to disassemble and replace the alternator of the Volkswagen Tiguan 2.0 TDI. First, let's open the hood of the vehicle and start by disconnecting the fuel filter by unscrewing the bracket screws; then we lift the vehicle and remove the lower engine cover, thus gaining access to the alternator.

At this point, we disconnect the alternator belt by unscrewing its bolts and disconnecting the electrical wiring to remove it and replace it with the new original one; finally, we install the alternator belt.


Posted on 24 December 2025 by ScegliAuto


Related tutorials

How to Replace the Thermostat on a Volkswagen Tiguan 2.0 TDI
How to Replace the Thermostat on a Volkswagen Tiguan 2.0 TDI
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today, follow the steps necessary to remove and replace the thermostat on the Volkswagen Tiguan 2.0 TDI. First, open the bonnet and start by disconne…
Replacement of Timing Belt on Volkswagen Tiguan 2.0 TDI
Replacement of Timing Belt on Volkswagen Tiguan 2.0 TDI
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Below are all the instructions on how to disassemble and replace the timing belt of the Volkswagen Tiguan 2.0 TDI. First, open the bonnet of the vehi…
Replacement of the Timing Belt on a Volkswagen Tiguan 2.0 TDI
Replacement of the Timing Belt on a Volkswagen Tiguan 2.0 TDI
Volkswagen Tiguan (2007-2016 / 5N, MK 1) The instructions provided in this guide will allow you to remove and replace the timing belt on a Volkswagen Tiguan 2.0 TDI. First, open the vehicle'…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos