Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the Instrument Cluster in the Volkswagen Jetta

Model: Volkswagen Jetta A4, MK 4 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Instrument cluster

See other generations:
Video tutorial

Today's instructions will allow you to disassemble and replace the instrument cluster in the Volkswagen Jetta. First, get into the vehicle and start by removing the plastic cover located at the bottom of the instrument cluster by prying it off at the sides; then unscrew the fixing screws located at the bottom of the cluster, finally disconnecting the wiring harness at the back to remove it, as shown in the video.

At this point, carry out the repair or replacement of the instrument cluster with the new one, reassembling it onto the dashboard!


Posted on 11 February 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Volkswagen Jetta
How to Reset the Oil Light on a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) If you own a Volkswagen Jetta and want to know the steps to manually reset the engine oil light, read this guide and follow the instructions. First, …
How to Reset the Service Light on a Volkswagen Jetta?
How to Reset the Service Light on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial, you will learn how to reset the service light on a Volkswagen Jetta. This operation is extremely simple and quick, and should only …
How to set the clock on the Volkswagen Jetta
How to set the clock on the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) The instructions in this guide will show you how to adjust the clock on the display of the instrument cluster in the Volkswagen Jetta. First, get in …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos