Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Volkswagen Polo

Model: Volkswagen Polo Polo 4, 9N, Polo IV, MK IV, MK 4 - Years 2001-2009
Part:

To completely clear the tyre pressure warning light on the Volkswagen Polo, inflate the tyres to the optimal pressure value: this value is indicated on the sticker affixed to the driver’s door pillar. Once inflation is complete, turn on the ignition and press and hold the SET button located on the central dashboard panel. Hold it for a few seconds until the warning light disappears. Once the procedure is complete, you can turn off the ignition.

Posted on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Volkswagen Polo?
How do you reset the tire pressure warning light on the Volkswagen Polo?
Volkswagen Polo (2017-2025 / Polo 6, AW1, MK VI, MK 6, Polo VI) In order to reset the tire pressure warning light of the Volkswagen Polo, you need to inflate the tires to the correct pressure value: once they are …
How to reset the tire pressure sensor of the Volkswagen Polo
How to reset the tire pressure sensor of the Volkswagen Polo
Volkswagen Polo (2017-2025 / Polo 6, AW1, MK VI, MK 6, Polo VI) The steps outlined in this guide will show us how to reset the tire pressure warning light (TPMS) of the Volkswagen Polo; before performing the reset…
How do you reset the tire pressure warning light on the Volkswagen Polo?
How do you reset the tire pressure warning light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, Polo 5, MK 5, Polo V, MK V) In order to reset the tire pressure warning light on the Volkswagen Polo, you first need to inflate the tires to the correct pressure value: once the…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos