Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Conditioning Compressor on a Volkswagen Golf 1.6 TDI

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Air conditioning

See other generations:
Video tutorial

Today's instructions will allow us to remove and replace the air conditioning compressor on a Volkswagen Golf 1.6 TDI. First, lift the vehicle and start by removing the front right wheel; then loosen the tensioner to remove the serpentine belt, as shown in the video.

At this point, disconnect the lower hose to access the air conditioning compressor, disconnect the pipes and unscrew all its fastening screws; replace the compressor with a new original one, and finally check its operation!


Posted on 8 March 2026 by ScegliAuto


Related tutorials

Replacement of the air conditioning compressor for the Volkswagen Golf 1.9 TDI.
Replacement of the air conditioning compressor for the Volkswagen Golf 1.9 TDI.
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's instructions will allow us to disassemble and replace the air conditioning compressor of the Volkswagen Golf 1.9 TDI. First, let's open the h…
How to Replace the Air Conditioning Compressor on the Volkswagen Golf?
How to Replace the Air Conditioning Compressor on the Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the air conditioning compressor on the Volkswagen Golf, open the bonnet to access the components inside the engine bay: the compressor is …
How to Replace the Air Conditioning Compressor on a Volkswagen Golf?
How to Replace the Air Conditioning Compressor on a Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the air conditioning compressor on a Volkswagen Golf, open the bonnet to access the components inside the engine bay: the compressor is lo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos