Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Conditioning Compressor on a Volkswagen Golf?

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Checks and maintenance

To replace the air conditioning compressor on a Volkswagen Golf, open the bonnet to access the components inside the engine bay: the compressor is located at the front left of the engine, along with its pulley. To remove it, loosen its mounting bolts and disconnect the corresponding power cables. Once freed, the old compressor can be taken out of its housing, and the new part can be installed by securing it with the bolts and inserting the belt.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today's instructions will allow us to remove and replace the air conditioning compressor on a Volkswagen Golf 1.6 TDI. First, lift the vehicle and st…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today's instructions will allow us to disassemble and replace the air conditioning compressor of the Volkswagen Golf 1.9 TDI. First, let's open the h…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The procedure for replacing the air conditioning compressor on the Volkswagen Golf is carried out by opening the hood, so that you have access to the…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos