Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Light on a Volkswagen Touran?

Model: Volkswagen Touran 5T, MK 2 - Years 2015-2024
Part: AdBlue warning light

To permanently clear the AdBlue light on a Volkswagen Touran, you will need to top up the necessary amount of fluid in the corresponding tank: to do this, open the fuel flap and unscrew the blue cap located in this position. Once the top-up is complete, close the tank and turn on the instrument cluster: if the required amount of fluid has been added, you will notice that the AdBlue light has disappeared, and you can then switch off the ignition.

Posted on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the AdBlue Warning Light on the Volkswagen Touran?
How to Reset the AdBlue Warning Light on the Volkswagen Touran?
Volkswagen Touran (2015-2024 / 5T, MK 2) To reset the AdBlue warning light on the Volkswagen Touran, open the fuel flap located at the rear right of the vehicle: by opening the flap, you wil…
How to reset the AdBlue warning light in the Volkswagen Touran?
How to reset the AdBlue warning light in the Volkswagen Touran?
Volkswagen Touran (2015-2024 / 5T, MK 2) If the AdBlue light has turned on in the instrument panel of our Volkswagen Touran, it means that the liquid in the anti-pollution system has reached…
How to Remove the AdBlue Warning Light on a Volkswagen Touran?
How to Remove the AdBlue Warning Light on a Volkswagen Touran?
Volkswagen Touran (2015-2024 / 5T, MK 2) If the AdBlue warning light has illuminated on the dashboard of your Volkswagen Touran, it means that the anti-pollution fluid has reached a too low …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos