Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Inspection Warning on a Volkswagen Golf

Model: Volkswagen Golf Golf 8, MK 8, Golf Viii - Years 2019-2026
Part: Service warning light

Today we will see the instructions on how to reset the inspection (service) warning on a Volkswagen Golf. First, get in the vehicle and turn on the instrument panel; then navigate to the onboard computer settings using the steering wheel controls, then go to the service option, as shown in the video. At this point, confirm and perform the reset of the maintenance interval, thus resetting the key and the maintenance message from the instrument panel; turn off the panel and start the engine, completing the reset operation!

Posted on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To reset the service on a Volkswagen Golf 7, turn on the instrument cluster and note the display showing "inspection now". Then, press and hold the "…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To reset the inspection light on a Volkswagen Golf VII, use the "0.0" or "SET" button on the dashboard. With the ignition off, press and hold this bu…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Resetting the inspection light on the Golf 7, produced until 2019, is very simple. This operation, like all reset procedures, can be done independent…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos