Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Conditioning Compressor on a Volkswagen Jetta 1.4 TSI

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air conditioning

See other generations:
Video tutorial

The main instructions in this guide will show you how to remove and replace the air conditioning compressor on a Volkswagen Jetta 1.4 TSI. First, open the bonnet of the vehicle and start by disconnecting the alternator belt by loosening the tensioner; then raise the vehicle and unscrew the mounting bolts of the air conditioning compressor, disconnecting the refrigerant lines and the power wiring, as shown in the video.

At this point, replace the compressor with the new one, following the video tutorial to the end!


Posted on 24 April 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Air Conditioning Compressor on the Volkswagen Jetta 2.5
Guide to Replacing the Air Conditioning Compressor on the Volkswagen Jetta 2.5
Volkswagen Jetta (2010-2018 / MK 6, A6) Today's guide will provide instructions for removing and replacing the air conditioning compressor on the Volkswagen Jetta 2.5L. First, lift the vehi…
How to Remove the Air Conditioning Compressor from a Volkswagen Jetta
How to Remove the Air Conditioning Compressor from a Volkswagen Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) This guide provides instructions on how to remove and replace the air conditioning compressor of the Volkswagen Jetta, as well as the Golf. First, op…
Replacing the Air Conditioning Compressor on the Volkswagen Jetta 2.5
Replacing the Air Conditioning Compressor on the Volkswagen Jetta 2.5
Volkswagen Jetta (2005-2010 / MK 5, A5) In this guide, we will go through the steps to remove and replace the air conditioning compressor on the Volkswagen Jetta. First, lift the vehicle an…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos