Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Window Regulator System

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Power window motor

See other generations:
Video tutorial

To access the window motor, it is first necessary to remove the door panel. Disconnect the internal handle cover and unscrew the two screws underneath.

Next, unscrew the other three screws along the bottom edge of the panel. At this point, using a metal pry tool, release the pressure clips securing the panel and pull it upwards to detach it from the window seal.

Disconnect the cable from the internal opening lever and the other connected plugs. Remove the rubber plugs to access the securing pins of the glass clamps (it is necessary to lower the glass by about 5 cm). Then unscrew the securing pins of the window motor, disconnect the plug connected to it, and remove it from its seat.

Unscrew the pins of the glass clamps and pull the glass upwards, securing it to the door frame with tape. Disconnect the cable guides from the soundproofing panel, unscrew all the screws securing the panel, and remove it along with the window regulator by disconnecting the plug connected to the lock: the window regulator is secured to the panel with rivets, so to replace it, it is necessary to drill out the rivets and subsequently secure the system with pins or rivets.

Proceed in reverse for reassembly.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to Replace the Window Regulator Mechanism of the Volkswagen New Beetle
How to Replace the Window Regulator Mechanism of the Volkswagen New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) The instructions in this guide will show you how to remove and replace the window regulator mechanism of the Volkswagen New Beetle in simple steps. F…
Instructions for Removing and Installing the Hood on Volkswagen New Beetle
Instructions for Removing and Installing the Hood on Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this video tutorial, you will see some important instructions for removing and installing the hood on a Volkswagen New Beetle. First, open the hoo…
How to Replace the Interior Handle on a Volkswagen Beetle?
How to Replace the Interior Handle on a Volkswagen Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To replace the interior handle on a Volkswagen Beetle, unscrew the fixing screws that secure the door panel to its housing: these screws are located …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos