Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the Service Reset on the Volkswagen Polo

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

Briefly review the steps to perform the routine maintenance (service) warning reset on the Volkswagen Polo. First, get into the cabin and start pressing and holding the reset button located at the bottom right of the instrument panel; turn on the ignition and release the button after the maintenance key appears on the display, as shown in the video.

At this point, press the left button once, confirming and executing the reset of the service light; finally, turn off the ignition and start the engine!


Posted on 5 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volkswagen Polo
How to Reset the Service Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today, I will explain how to reset the service light on a Volkswagen Polo. To perform the reset, keep the instrument cluster off and press the button…
How to Reset the Service Light on the VW Polo 5
How to Reset the Service Light on the VW Polo 5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today, we will see the steps to independently reset the service light related to the car service on a Volkswagen Polo mk5. The first step is to turn …
How to Perform a Service Reset on a Volkswagen Polo 9N
How to Perform a Service Reset on a Volkswagen Polo 9N
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Let’s see, thanks to this very useful video guide, all the necessary steps to perform a service reset on a fourth-generation Volkswagen Polo, produce…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos