Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Manually Put a Volkswagen-Audi DSG Gearbox into Neutral

Model: Volkswagen Volkswagen Various
Part: Transmission

Video tutorial

To manually put a DSG automatic gearbox from Volkswagen/Audi into neutral when the car has no power (for example, due to a flat battery or an electronic fault), you can access the gear selector located under the plastic cover at the base of the gearbox, secured by screws.

Remove it by unscrewing the retaining screws, and inside, look for the manual release device, which is usually a yellow/black button or lever (as shown in the video).

Then, push the lever down (or if there is a button, press it). Replace the cover. Remember, this is an emergency procedure, only to push or tow the car when it is without power.


Posted on 10 August 2026 by ScegliAuto


Related tutorials

Maintenance of the Volkswagen DSG7 DQ200 automatic gearbox
Maintenance of the Volkswagen DSG7 DQ200 automatic gearbox
Volkswagen Volkswagen Various This video discusses the maintenance of the 7-speed DSG DQ200 automatic transmission, installed in many Volkswagen vehicles. It is a transmission wit…
How do you reset the DSG7 gearbox of Volkswagen cars?
How do you reset the DSG7 gearbox of Volkswagen cars?
Volkswagen Volkswagen Various You can reset the DSG automatic transmission of Volkswagen by moving the gear selector to the P position and then engaging the handbrake; from this p…
How to Disable Component Protection in Volkswagen Cars?
How to Disable Component Protection in Volkswagen Cars?
Volkswagen Volkswagen Various It should be noted that the attached tutorial video was made while performing the specified technical intervention on an Audi vehicle, but it also pe…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos