Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

To reset the maintenance light on the Volkswagen Golf 7, turn on the ignition without starting the engine. On the dashboard, below the central display, locate the onboard computer buttons.

Press the Menu button or similar to enter the main menu, then scroll to the 'Maintenance' or 'Service' option. When the remaining mileage or service light appears, hold down the OK or Set button for about 10 seconds until the value starts to flash and is reset.

Turn off the ignition, wait a few seconds, and restart the car: the maintenance light should be off, confirming the reset was successful.


Posted on 15 August 2026 by ScegliAuto


Related tutorials

How to Reset the Airbag Light on a Golf 5.
How to Reset the Airbag Light on a Golf 5.
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you can see how to reset the airbag light on the Golf 5 by following simple steps that will guide you to proper vehicle manag…
How to Reset the Service Light of the Volkswagen Golf 6?
How to Reset the Service Light of the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today we will discover the procedure to reset the service light for the routine maintenance oil change of the sixth generation Volkswagen Golf. First…
How to Reset the Engine Light on a Volkswagen Golf 5
How to Reset the Engine Light on a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In today's video, we will see how to reset the service interval warning light on the fifth generation Volkswagen Golf. Follow these steps: - press an…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos