Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Serpentine Belt on a Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: V-belt

Video tutorial

To replace the serpentine belt, or auxiliary belt, on a Volkswagen Up, turn off the engine and wait for it to cool down. Safely lift the front of the car and remove the cover that prevents access to the belt area.

Before removing it, carefully observe the routing around the pulleys to correctly install the new one. Use a suitable tool on the tensioner, rotating it to relieve tension, then hold it in position and slide the old belt off the pulleys. Position the new belt following the same routing and ensure the grooves are perfectly seated.

Slowly release the tensioner to apply tension to the belt. Check the alignment again, reattach the removed covers, and start the engine to ensure the belt runs smoothly.


Posted on 31 August 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Volkswagen Up 1.0 TSI
Guide to replacing the timing belt of the Volkswagen Up 1.0 TSI
Volkswagen Up (2011-2024 / MK 1) Today's information will show us how to disassemble and replace the timing belt of the Volkswagen Up 1.0 TSI. To access the timing belt, it will be n…
Replacing the Timing Belt on the Volkswagen Up! 1.0 MPI
Replacing the Timing Belt on the Volkswagen Up! 1.0 MPI
Volkswagen Up (2011-2024 / MK 1) In this video tutorial, follow the main steps to remove and replace the timing belt on the Volkswagen Up! 1.0 MPI. First, open the bonnet of your car…
When Should the Timing Belt be Replaced on the Volkswagen Up?
When Should the Timing Belt be Replaced on the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) The timing belt on the Volkswagen Up, like any other vehicle, must be replaced according to the manufacturer's guidelines, specifically every 75,000 …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos