Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Assist Sensor on the Volkswagen Passat

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

See other generations:
Video tutorial

In this guide, we will discover the instructions that will allow us to remove and replace the front assist and detection sensor on the Volkswagen Passat. First, open the vehicle's bonnet and begin removing the front bumper grille by unscrewing the upper fixing screws.

Then unscrew the front assist sensor screws, disconnecting the electrical connector at the back to remove it, as shown in the video. At this point, replace the sensor with the new original one, reassembling it correctly; reset the error using a diagnostic tool and check its operation.


Posted on 7 September 2026 by ScegliAuto


Related tutorials

How to activate all driving aids in the Volkswagen Passat
How to activate all driving aids in the Volkswagen Passat
Volkswagen Passat (2023-2026 / 3J, B9) In this short guide, we will see the instructions that will allow us to activate all the driving aids of the Volkswagen Passat. First of all, let's g…
How to Change the Coolant Temperature Sensor on a Volkswagen Passat 1.8T
How to Change the Coolant Temperature Sensor on a Volkswagen Passat 1.8T
Volkswagen Passat (1996-2005 / 3BG, B5) In this guide, find the instructions to remove and replace the coolant temperature sensor on a Volkswagen Passat 1.8T. First, open the bonnet and loc…
How to Activate the Blind Spot Sensor on the Volkswagen Passat Mirror
How to Activate the Blind Spot Sensor on the Volkswagen Passat Mirror
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) In this guide, discover the instructions to activate the blind spot sensor on the external rear-view mirror of the Volkswagen Passat. First, get into…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos