Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Volkswagen Passat

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Front bumper

Today's instructions will show us how to disassemble and replace the front bumper of the Volkswagen Passat, in simple steps. First, we open the car's hood and start removing all the screws and clips above and below the bumper; then we remove the additional screws located on both sides of the front wheel arches, as shown in the video. At this point, we gently detach the bumper on the sides until it is completely removed, replacing it if necessary with a new one; we then reassemble and secure the front bumper, applying the reverse procedure!

Posted on 26 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of the Volkswagen Passat?
How to Remove the Front Bumper of the Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To remove the front bumper of the Volkswagen Passat, first remove the grille located in the centre of the bumper: this will be secured by screws foun…
How to Remove the Front Bumper from the Volkswagen Passat
How to Remove the Front Bumper from the Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) To remove the front bumper from the Volkswagen Passat, loosen the screws securing the upper grille: these screws will be accessible from the holes in…
How to Remove the Front Bumper of a Volkswagen Passat
How to Remove the Front Bumper of a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before you can start, open the bonnet of your Volkswagen Passat. Begin by unscrewing and removing the screws that secure the front grille, then uncli…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos