Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Up?

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Service warning light

The Service light displayed on the Volkswagen Up can be completely cleared by moving inside the cabin, so that you can press the button on the right side of the instrument cluster, labelled "0.0/SET". While holding this button, turn the key and switch on the instrument cluster, noting that the display will show "INSP" and the maintenance interval will start flashing. When the light becomes stable, you can release the button, and the Service light will be completely cleared. You can turn off the ignition after completing the operation.

Posted on 26 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volkswagen Up?
How to Reset the Service Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To reset the service light on a Volkswagen Up, go inside the cabin and press the button on the right side of the instrument panel marked "0.0/SET". W…
How to Reset the Service Light on a Volkswagen Up?
How to Reset the Service Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To reset the Service light on a Volkswagen Up, sit inside the cabin and press the button at the centre of the instrument cluster marked "0.0/SET". Wh…
How to Reset the Service Light on a Volkswagen Up?
How to Reset the Service Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To reset the Service light on a Volkswagen Up, press and hold the button on the right side of the instrument cluster, labelled "0.0/SET". While holdi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos