Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Gear Knob Gaiter on a Volkswagen Golf 7

Model: Volkswagen Golf - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Shifter boot

See other generations:
Video tutorial

This video tutorial shows how to remove the gear knob gaiter on a Volkswagen Golf model 7. To remove the gear shift cover, use a flat-head screwdriver or a plastic tool to avoid damaging the dashboard plastics. Lift one corner of the gaiter to release the entire block and raise the base to use pliers to cut the tie wrap.

After removing the tie wrap, pull upwards firmly to remove the knob and then slide the gaiter off. Reassembly follows the reverse procedure.


Posted on 19 November 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) To remove the gear shift gaiter on a Volkswagen Golf, sit inside the car and look towards the centre console where the gear lever is located. Careful…
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) In this tutorial, learn how to remove and replace the gear knob and gaiter of the Volkswagen Golf. First, get inside the vehicle and start by removin…
Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) In this video, we will see how to remove the gear knob and gaiter on a Volkswagen Golf Mk4. First, get inside the vehicle and unclip the gear gaiter …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Replacing the Glow Plugs on the Fiat Ducato 2.3 Multijet

Today, we will go through the main instructions to remove and replace the glow plugs on the Fiat Ducato 2.3 Multijet. First, open the bonnet of the vehicle and begin by removing the front bumper; to access the glow plugs, it will also be necessary to remove the cooling radiator and the intercooler by unscrewing the bracket bolts and disconnecting the various pipes. Now disconnect the connectors from the glow plugs and use a socket wrench with an extension to unscrew and remove them, replacing them with new original ones.

Watch the video!


by ScegliAuto

More videos