Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Timing Belt on VW Golf 6

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

Here’s how to replace the worn timing belts on a Volkswagen Golf 6. Release the bonnet and lift it, securing it in place. Disconnect the hoses from the coolant reservoir, then use pliers to disconnect the power wiring, and remove the plastic engine soundproofing panel.

Raise the vehicle with a column lift to access the underside. Remove the wheel arch liner.

Use a spanner to loosen the tensioner pulley and slide the belt off. With a socket wrench, unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, tensioner, and belt.

Refit the wheel arch liner.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's main information will show you how and when to replace the timing belt on a Volkswagen Golf 1.4 TSI. For this type of engine, the timing belt…
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below we will discover information on how to disassemble and replace the timing belt of the Volkswagen Golf 1.6 TDI; the manufacturer states that, on…
Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, we will discover the procedure for removing and replacing the timing belt on a Volkswagen Golf 1.4 TSI. First, open the engine bonnet …

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos