Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : Vw Polo rear bulbs replacement

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Rear light bulb
Operation: Vw Polo rear bulbs replacement

Are the rear light bulbs on Volkswagen polo burned out? Let's see how they change from inside the lighthouse. We open the trunk lid, open the trim on the side of the trunk. We unscrew the tightening screws placed on the side of the headlight (plastic). We detach the rear light from its housing once all the screws have been removed, disconnect the power supply terminals and replace the damaged bulbs with new ones (size and voltage equal). Finally we go to reassemble the headlight above the bodywork, screw the screws and reconnect the power supply terminals. We turn on and test the lights.


Posted on 2 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos