Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Removing the headlight on Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo III, Polo 3, MK III, 6N, MK 3 - Years 1994-2003
Part: Headlight
Operation: Removing the headlight on Vw Polo

Is the headlight mounted on a Vw Polo damaged? Let's see how it disassembles and changes. Lift the front hood by pulling the hood opening lever and put it in safety. We unscrew the locking pins above the headlight plastics with a socket wrench. We detach the lamp holders from the headlight and extract the same from the front of the car. We assemble the new headlight with the new bulbs if damaged and (always suitable type and size) we insert the headlight in its housing. We screw the pins above the headlight with the socket wrench. We test the correct functioning of the lights by turning on the knobs.


Posted on 2 December 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the front headlight of the Volkswagen Polo 8? Read Answer
    • Polo 2001-2009 - How much does the right headlight of a Volkswagen Polo cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos