Do it yourself
Frequently asked questions about cars and motorcycles

Installing a Rear View Camera

Model: Volkswagen Amarok MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Accessory kit

See other generations:
This video is currently unavailable

The following video illustrates how to mount a camera on the rear number plate of a Volkswagen Amarok. The camera also includes four infrared LEDs for better night visibility.

First, pass the camera cable through the gap to the right of the number plate. The power needed for the camera will be supplied by the reverse light.

Remove the two Torx screws to extract the right rear light. Disconnect the power connector from the rear light.

Strip the insulation from the wires indicated in the image and solder the camera's power wires (remember to re-insulate the wires). Use cable ties to secure the camera cable to the rear light cable.

Route the wiring under the rear door on the driver's side. The video shows the exact path for the wiring.

The video uses the cigarette lighter socket to provide power for the monitor. At the end, a test of the camera's operation in the dark is conducted.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Volkswagen Amarok (2010-2021 / MK 1) The fuse box of a Volkswagen Amarok is located under the steering column. To access it, start by turning off the vehicle and ensuring it is parked in…
Volkswagen Amarok (2010-2021 / MK 1) In this video we see how to change the rear headlight bulb of a Volkswagen Amarok: we need to lower the rear side of the pick-up truck, in order to d…
Volkswagen Amarok (2010-2021 / MK 1) Removing the tail lights on the Volkswagen Amarok is a straightforward task, as shown in the attached video tutorial. Start by opening the tailgate, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos