Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to change the choke bulbs on Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo III, Polo 3, MK III, 6N, MK 3 - Years 1994-2003
Part: Interior lights ceiling light bulb
Operation: How to change the choke bulbs on Vw Polo

Let's replace the damaged grip light bulbs on a Volkswagen Polo, let's see how. We remove the ventilation knobs with our hands or with pliers. We disconnect the bezels of the air conditioning controls with a screwdriver (by levering) if we have to disassemble the other bulbs. We extract the bulbs from the instrument panel (as in the video). We are careful not to break the plastic tabs of the knobs. After removing the central knob from the dashboard, replace the bulb and reassemble it. We disassemble the other air control knobs using the same procedure. We test the functioning of new bulbs.


Posted on 3 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2009-2017 - Why don't the Volkswagen Polo interior lights work? Read Answer
    • Polo 2001-2009 - Why do the interior lights on my Volkswagen Polo Mk4 no longer work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos