Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Headlamp on VW Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light

See other generations:
Video tutorial

Remove the rear headlamp from a VW Polo to change the damaged bulbs. Open the boot lid, then remove the side covering cloth from the boot.

Unscrew the plastic securing screw of the rear headlamp, disconnect the power connectors attached to the headlamp, and pull it away from its housing. Replace the damaged bulbs with new ones (same voltage).

Refit the headlamp with the securing screw, close the inspection hatch with the covering cloth. Test the operation of the new bulbs using the control knob (located above the dashboard).


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Rear Headlight Block on VW Polo
Instructions for Removing the Rear Headlight Block on VW Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Let's see how to remove the rear headlight of a VW Polo. Lift the boot to access the inside of the boot space, then find the trim on the side. Unscre…
How to Replace the Rear Light Bulb in a Volkswagen Polo?
How to Replace the Rear Light Bulb in a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the rear light bulb in a Volkswagen Polo, open the boot lid and move the carpet inside the boot to access the light. Unscrew the retaining…
How to Replace the Rear Light Bulb on the Volkswagen Polo
How to Replace the Rear Light Bulb on the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) Today, you will learn how to replace the rear light bulbs on the Volkswagen Polo. Open the rear boot and remove the side carpet to access the locking…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos