Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Fuse Box on Golf 6

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Fuse box

How to remove the fuse box on a Golf 6? Here’s how to do it. Open the door and enter the vehicle, use a plastic lever to remove the trim on the side of the dashboard (left side of the steering wheel). Use pliers to pull out the damaged fuses located in the compartment. Once this is done, insert the new fuses into the designated slots in the compartment. Finally, close the fuse box with the plastic cover. Test the correct operation of the Golf 6 by turning on the instrument panel with the dedicated key.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Want to remove the fuse box on a Golf 6? Lift the front bonnet and see how to disassemble the fuse box components. Pull up the engine compartment ope…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Briefly, we will look at the information regarding the location and diagram of the fuse boxes for the Volkswagen Golf. First, get inside the vehicle …
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Discover in this video the positioning of the fuse boxes in the fifth series Volkswagen Golf, following the instructions below. First, locate the int…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 1997-2003 - Where are the cigarette lighter fuses located in the Volkswagen Golf IV? Read answer
    • Golf 2012-2019 - Where is the Volkswagen Golf 7 Start & Stop fuse located? Read answer
    • Golf 2003-2008 - Where is the Volkswagen Golf windshield washer pump fuse located? Read answer
    • Golf 2003-2008 - What is the Volkswagen Golf Mk5 wiper fuse? Read answer
    • Golf 2003-2008 - Where is the airbag fuse located in the Volkswagen Golf? Read answer
    • Golf 2003-2008 - Where is the VW Golf 5 radiator fan fuse located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos