Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel on VW Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Remove the door panel on a VW Jetta if damaged. Remove the plastic cover under the door opening lever and the plastic trim above the panel to access the screws.

Use a screwdriver to unscrew the screws located in the holes where you removed the cover. Remove the window switch panel and unscrew all screws on the panel.

Detach the panel from the door (disconnect the power wiring and the opening cable). Perform the desired maintenance inside the door.

Then, refit the new door cover panel. Screw in the securing screws and replace the plastics.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Volkswagen Jetta (1998-2005 / A4, MK 4) Remove the rear door panel on a Volkswagen Jetta. Use a screwdriver to unscrew the screws located in the space of the upper door opening lever and th…
Volkswagen Jetta (2005-2010 / MK 5, A5) Below we will discover the steps that will allow us to disassemble and remove the front door panel of the Volkswagen Jetta. First, let's open the car…
Volkswagen Jetta (2005-2010 / MK 5, A5) How to remove the door panel on a VW Jetta? Let's see how to take it off from the top of the door. Remove the cover of the internal handle and unscre…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos