Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel on a VW Jetta

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

How to remove the door panel on a VW Jetta? Let's see how to take it off from the top of the door. Remove the cover of the internal handle and unscrew the screws located inside it. Unscrew the screws at the bottom of the panel.

Detach the securing clips. Finally, pull off the panel with your hands and disconnect it from the door (disconnect the power wiring and the opening cable).

Fit a new panel onto the car door and screw in the screws. Don't forget to connect the power terminals behind the panel before fitting it. Test the operation of the buttons.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Volkswagen Jetta (2005-2010 / MK 5, A5) Removing the panel from the Volkswagen Jetta? Remove the panel if you want to replace it or access parts inside the door. Use a screwdriver to unscre…
Volkswagen Jetta (2010-2018 / MK 6, A6) Remove the door panel on a VW Jetta if damaged. Remove the plastic cover under the door opening lever and the plastic trim above the panel to access …
Volkswagen Jetta (2005-2010 / MK 5, A5) Below we will discover the steps that will allow us to disassemble and remove the front door panel of the Volkswagen Jetta. First, let's open the car…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos