Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Lock on a 2005 Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Door lock

See other generations:
Video tutorial

Required: T20 torx key, T10 torx key, flat screwdriver, pliers. 1- Remove the torx screws from the door catch. 2- Manually remove the lock cylinder and use pliers to pull off the handle. 3- Remove another T10 screw behind the lock handle. This operation frees the entire door panel; remove it carefully. 4- Remove the other two T20 torx screws that secure the door mechanism; you may need to use a penetrating spray (like WD40). Detach the handle frame, taking care not to lose the small seals around the bolts. 6- Remove the door mechanism by lifting it slightly and pulling it towards you. 7- Using a screwdriver, disconnect the cable with pliers and the plastic cover (held by three white tabs) with a screwdriver.

To reassemble the new lock, follow the reverse procedure.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to replace the door lock on the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the door lock on the Volkswagen Golf, open the door to detach the side trim: beneath this trim, you will find the screw that secures the l…
How to Replace the Door Lock on a Volkswagen Golf 5?
How to Replace the Door Lock on a Volkswagen Golf 5?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To replace the door lock on a Volkswagen Golf 5, remove the trim located on the side of the door. This will allow you to loosen the screw underneath …
Replacing the Lock Cylinder on a Volkswagen Golf Mk4
Replacing the Lock Cylinder on a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, we will see how to replace the lock cylinder on the door of a Volkswagen Golf Mk4. First, open the car door and, after removing the si…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos