Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Restoring Satin Finish on Steering Wheel Spokes

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Steering wheel

See other generations:
Video tutorial

If there are streaks (generally caused by sweat acidity) or scratches from rings or bracelets on the aluminium spokes of the steering wheel, you can remedy this by applying a satin aluminium effect adhesive film that adheres perfectly to the spoke, restoring its aesthetics.

The strips should be shaped appropriately following the curvature of the spoke from the steering wheel side.

Apply soapy water to the spoke before applying the adhesive to allow for adjustment and proper positioning. Once aligned, ensure it adheres correctly using a small brush, avoiding the formation of air bubbles.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Remove the Airbag from a Volkswagen Golf 5
How to Remove the Airbag from a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) If you need to remove the steering wheel for replacing, for example, the airbag ribbon or the steering angle sensor, a common fault on this model, th…
How to Remove the Light Switch on the Steering Wheel of a VW Golf V
How to Remove the Light Switch on the Steering Wheel of a VW Golf V
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The light switch or steering column control unit is a device that integrates various elements; in addition to the indicators and windscreen wiper con…
How to install the leather cover on a Volkswagen Golf VI
How to install the leather cover on a Volkswagen Golf VI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) We can see how simple it is to install a leather steering wheel cover on the steering wheel of a Volkswagen Golf VI, by doing the job ourselves. Some…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos