Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wheel Bearing

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Bearing

See other generations:
Video tutorial

Obtain the replacement bearings. Lift the vehicle, secure it, and remove the wheel.

Remove the metal cover protecting the securing bolt located on the hub, which will then be unscrewed. If there are difficulties, use penetrating spray.

Remove the entire brake assembly. Using a puller, remove the drum to access the bearing.

Free the bearing by removing it. Clean thoroughly from the old grease. Then position the new bearing inside after properly greasing it. Using a piece of wood, tap with the hammer to ensure the bearing fits perfectly into its housing.

Refit all the spacers previously removed.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Wheel Bearing on the Volkswagen Golf
Replacing the Rear Wheel Bearing on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's video tutorial shows you how to dismantle and replace the rear wheel bearing on the Volkswagen Golf. First, lift the vehicle and start by rem…
How to Replace the Front Wheel Bearing on the Volkswagen Golf 6?
How to Replace the Front Wheel Bearing on the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the front wheel bearing on the Volkswagen Golf 6, you need to remove the wheel corresponding to the bearing being replaced by unscrewing i…
How to replace the front wheel bearing of a Volkswagen Golf
How to replace the front wheel bearing of a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Below we will see the step-by-step instructions that will allow us to disassemble and replace the front wheel bearing of the Volkswagen Golf. First o…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos