Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster Clock from a Volkswagen Bora

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Clock

See other generations:
Video tutorial

In today's video, you will see how to remove the clock from the instrument cluster of a second-generation Volkswagen Bora. First, get inside the vehicle and remove the plastic cover around the steering wheel; then, unscrew the screws located underneath using a ratchet.

At this point, you can extract the instrument cluster from your car, also removing the integrated clock; finally, disconnect the electrical connector at the back by opening the tab. Now remove the rear cover to access the clock and the electronic board.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Volkswagen Bora
Resetting the Service Light on the Volkswagen Bora
Volkswagen Bora (1998-2005 / MK 6) Briefly, we will discover how to reset the service light for routine maintenance on the Volkswagen Bora. First, get into the vehicle and press and ho…
How to Remove the Front Outer Handle on a Volkswagen Bora?
How to Remove the Front Outer Handle on a Volkswagen Bora?
Volkswagen Bora (1998-2005 / MK 6) As shown in this tutorial, removing the front outer handle on a Volkswagen Bora is an extremely simple and quick operation. First, open the relevant …
Removing the Window Regulator Motor on Volkswagen Bora - Jetta MK4
Removing the Window Regulator Motor on Volkswagen Bora - Jetta MK4
Volkswagen Bora (2005-2010 / MK 7) In this video, follow the instructions to remove and replace the window regulator motor on a Volkswagen Bora and Jetta MK4. First, open the front doo…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos