Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Key

See other generations:
Video tutorial

The battery in question is a CR 2032, available for £1-£2, depending on where you purchase it. Start by pressing the button to open the physical key of your Volkswagen Polo. Next, unclip the rear cover of the battery. This will give you access to the exhausted battery.

Proceed to remove it by simply pulling it towards you, and you will have completed the disassembly. To fit the new battery and close the key, simply follow these few steps in reverse, and you will have completed the replacement.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Volkswagen Polo
How to replace the battery of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today we will see the necessary instructions in order to disassemble and replace the battery of the Volkswagen Polo. First, we open the hood of the c…
Replacing the Battery on a Volkswagen Polo
Replacing the Battery on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today's brief instructions will show you how to remove and replace the battery on a Volkswagen Polo. First, open the bonnet of the vehicle and begin …
Replacing the Battery on a Volkswagen Polo
Replacing the Battery on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Let's see how to replace the battery on a Volkswagen Polo. Open the front engine compartment and start the battery removal process. Once the engine c…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos