Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glove Compartment Bulb on a Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Interior dome light bulb

See other generations:
Video tutorial

Before starting, sit in the front passenger seat of your Volkswagen Golf and open the glove compartment. Begin by prying out and removing the bulb holder from the glove compartment using a flathead screwdriver.

Then, disconnect the corresponding electrical connector. At this point, remove the bulb cover, and you will reach the blown bulb.

Proceed to remove the bulb, completing the disassembly. To fit the new bulb, simply follow these instructions in reverse, and you will have completed the replacement.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to replace the glove compartment bulb in a Volkswagen Golf 6?
How to replace the glove compartment bulb in a Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) This video tutorial illustrates, step by step, the entire procedure for removing and replacing the bulb located inside the glove compartment of your …
How to Replace the Front Headlamp Bulb of the Volkswagen Golf 6?
How to Replace the Front Headlamp Bulb of the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the front headlamp bulb of the Volkswagen Golf 6, open the bonnet to access the back of the headlamp where the bulb needs to be replaced. …
How to Replace the Headlight Bulb on a 2015 Volkswagen Golf Mk7
How to Replace the Headlight Bulb on a 2015 Volkswagen Golf Mk7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) If you want to replace the headlight bulb on your 2015 Volkswagen Golf Mk7 yourself, follow this procedure to complete the operation quickly and safe…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos