Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Volkswagen Tiguan TSI MK1

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

In this video, you will see the steps to remove and replace the engine battery on a first-generation Volkswagen Tiguan with a TSI engine. First, open and lift the bonnet of your car and remove the plastic cover of the battery; then disconnect the battery terminals by unscrewing the bolts, and subsequently remove the battery holding bracket using a socket spanner with an extension.

At this point, you can remove the battery and replace it with a new one of the correct type: apply the reverse procedure for reassembly!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on the Volkswagen Tiguan 2.0 TSI
Replacing the Fuel Pump on the Volkswagen Tiguan 2.0 TSI
Volkswagen Tiguan (2007-2016 / 5N, MK 1) The following steps will illustrate how to remove and replace the fuel pump on the Volkswagen Tiguan 2.0 TSI. First, open the rear doors and lower th…
How to Replace the Throttle Body on a Volkswagen Tiguan 2.0 TSI
How to Replace the Throttle Body on a Volkswagen Tiguan 2.0 TSI
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this guide, find the instructions to disassemble and replace the throttle body on a Volkswagen Tiguan 2.0 TSI. First, open the engine bonnet and b…
How do you replace the water pump of the Volkswagen Tiguan 2.0 TSi?
How do you replace the water pump of the Volkswagen Tiguan 2.0 TSi?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) To replace the water pump of the Volkswagen Tiguan 2.0 TSi, you will need to lift the car in order to have access to the components in the lower part…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos