Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Throttle Body on a Volkswagen Tiguan 2.0 TSI

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Throttle body

See other generations:
Video tutorial

In this guide, find the instructions to disassemble and replace the throttle body on a Volkswagen Tiguan 2.0 TSI. First, open the engine bonnet and begin to disassemble and remove the air filter box by disconnecting the intake hose; unscrew the bolts securing the throttle body and disconnect the electrical connector from the throttle position sensor to remove it, as shown in the video.

At this point, carry out the repair or replacement of the throttle body, replacing the gasket, and finally reassemble the air filter box.


Posted on 19 June 2026 by ScegliAuto


Related tutorials

Where is the Throttle Body on a Volkswagen Tiguan?
Where is the Throttle Body on a Volkswagen Tiguan?
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) The throttle body of the Volkswagen Tiguan is located on the engine, directly connected to the intake manifold (the black plastic box to which the ai…
How do you replace the water pump of the Volkswagen Tiguan 2.0 TSi?
How do you replace the water pump of the Volkswagen Tiguan 2.0 TSi?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) To replace the water pump of the Volkswagen Tiguan 2.0 TSi, you will need to lift the car in order to have access to the components in the lower part…
Replacing the Fuel Pump on the Volkswagen Tiguan 2.0 TSI
Replacing the Fuel Pump on the Volkswagen Tiguan 2.0 TSI
Volkswagen Tiguan (2007-2016 / 5N, MK 1) The following steps will illustrate how to remove and replace the fuel pump on the Volkswagen Tiguan 2.0 TSI. First, open the rear doors and lower th…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos