Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Volkswagen Up!

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Accessory kit

Video tutorial

Before you can begin, open the bonnet of your Volkswagen Up. Start by removing the oil dipstick. Next, lift the front of the car. This will give you access to the lower drain nut of the oil sump, which you need to unscrew and remove.

Once you have removed the drain nut, wait for all the oil to drain out, then re-screw the nut. At this point, lower the car, then add the new oil through the filler hole, successfully completing the engine oil change.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Change the Oil on VW Up
Change the Oil on VW Up
Volkswagen Up (2011-2024 / MK 1) Learn how to change the engine oil on your Volkswagen Up. Open the car door and pull up the engine bay release lever located at the bottom left of th…
How to Change Oil and Engine Filter on Volkswagen Up
How to Change Oil and Engine Filter on Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) How do you change the oil and engine filter on a Volkswagen Up? It's a simple operation if you follow the right steps, let's see how to proceed: lift…
Reset the Engine Oil Change Warning (Service) on the Volkswagen Up
Reset the Engine Oil Change Warning (Service) on the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) We will briefly go through the instructions to reset the engine oil change warning (service) on the Volkswagen Up, as well as the Skoda Citigo and Se…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos