Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Car Radio on a Volkswagen

Model: Volkswagen Volkswagen Various
Part: Car stereo

Video tutorial

How to dismantle the car radio on a Volkswagen? Let's see how to remove the old radio and install the new one. Insert the keys into the holes on the plastic cover of the radio, pull it towards you until it is fully extracted. Once the radio is out, disconnect the power connectors and the antenna cable.

Finally, install the original radio or a generic brand with the appropriate adapter for the input and for connecting the connectors. Remember to connect not only the power connectors but also the antenna reception cable.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from the Volkswagen Atlas
How to Remove the Radio from the Volkswagen Atlas
Volkswagen Volkswagen Various Discover in this guide how to remove and replace the standard radio of the Volkswagen Atlas in simple and quick steps. First, get inside the vehicle …
Removing the Radio from a Volkswagen
Removing the Radio from a Volkswagen
Volkswagen Volkswagen Various Do you want to remove the radio from a Volkswagen car? Here’s how to take the radio out from the dashboard. Switch off the car radio, then use the or…
How to Reset the Radio in Your Volkswagen
How to Reset the Radio in Your Volkswagen
Volkswagen Volkswagen Various If the radio fitted in your Volkswagen is experiencing serious and persistent software issues, you must perform the following reset procedure. Enter …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos