Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Volkswagen Passat B7-B8 with a Flat Remote Battery

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Key

See other generations:
Video tutorial

In this short video, let's see how to open the car in case of emergency when the remote battery is flat; in this case, on a Volkswagen Passat B7 and B8. To open the car, first remove the physical key from the remote; then pry open the cover of the opening handle (there's a small designated hole at the bottom) to remove it, as shown in the video.

At this point, you will be able to open your car by inserting and turning the key in the lock; you can also perform the same operation to lock the vehicle.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Open the Door on Volkswagen Passat with a Flat Remote Battery
How to Open the Door on Volkswagen Passat with a Flat Remote Battery
Volkswagen Passat (2005-2010 / B6, 3C) In this short video guide, you will see how to open the door of your vehicle with a flat remote key battery, specifically on a third-generation Volks…
How to Open the Bonnet on a Volkswagen Passat?
How to Open the Bonnet on a Volkswagen Passat?
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) In this tutorial, you will see how to open the bonnet on a Volkswagen Passat, a very simple operation that follows the typical procedure for most veh…
How to Open the Door with a Flat Battery on a Volkswagen Passat
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) In this video tutorial, you will learn how to open the door of a Volkswagen Passat when the remote battery is flat. To open the door in this emergenc…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2010-2014 - What to do if the Passat key does not open the car? Read answer

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos